antd useTable refetch
@kapa.ai antd useTable is not automatically refetching list data after a successful update via useDrawerForm. How can I force a refetch on the useTable data to get the updated values?
13 Replies
Hi @amvdxc. I'm kapa.ai, your friendly support bot. I will try to answer your question by searching through the knowledge base. :wave:
----------------------
To force a refetch on the
useTable
data in an Ant Design-based refine application, you can use the refetch
method provided by the tableQueryResult
object. This method allows you to manually trigger a refetch of the table data.
Here is an example of how you can achieve this:
1. Access the refetch
method from tableQueryResult
:
2. Call the refetch
method after a successful update:
You can call the refetch
method in the success callback of your useDrawerForm
or any other event where you need to refresh the table data.
This will ensure that the table data is refetched and updated after a successful update operation.
For more information, you can refer to the following documentation and issues:
- Refine useTable Documentation (https://refine.dev/docs/data/hooks/use-table/#queryoptions)
- GitHub Issue #1384 (https://github.com/refinedev/refine/issues/1384)
- GitHub Issue #1512 (https://github.com/refinedev/refine/issues/1512)
- Refine FAQ on Refetching Data (https://refine.dev/docs/guides-concepts/faq/#how-can-i-refetch-data)
If you need further assistance, please let me know!
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------judicial-coralOP•4mo ago
@kapa.ai I am using antd useTable, so I only have access to tableQuery, not tableQueryResult. There is a refetch method on tableQuery, but when I try to use it, it has no effect. How can I fix this?
Let me check the knowledge base for you. One moment! :books:
----------------------
If you are using
useTable
with Ant Design and only have access to tableQuery
, you can still use the refetch
method to manually trigger a refetch of the table data. However, if the refetch
method is not having any effect, there might be a few reasons for this issue.
Here are some steps to ensure that the refetch
method works correctly:
1. Ensure Correct Usage of refetch
Method:
Make sure you are calling the refetch
method correctly from the tableQuery
object. Here is an example:
2. Check Query Options:
Ensure that the queryOptions
are set correctly in the useTable
hook. You can pass options like enabled
to control when the query should be active.
3. Verify Resource and Data Provider:
Ensure that the resource name and data provider are correctly configured. If the resource name or data provider is incorrect, the refetch might not work as expected.
4. Example Usage in a Component:
Here is a complete example of how to use the refetch
method in a component:
By following these steps, you should be able to manually trigger a refetch of the table data using the refetch
method from the tableQuery
object.
For more information, you can refer to the following documentation:
- Refine useTable Documentation (https://refine.dev/docs/ui-integrations/ant-design/hooks/use-table/#queryoptions)
If you need further assistance, please let me know!
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@705425032960016475> kapa.ai is still learning and improving, please let us know how it did by reacting below
judicial-coralOP•4mo ago
the refetch call still returns the old data. @kapa.ai
Let me check the knowledge base for you. One moment! :books:
----------------------
If the
refetch
call still returns the old data, it might be due to caching issues or the way the data provider is handling the requests. Here are some steps to troubleshoot and resolve this issue:
1. Disable Caching:
Ensure that the data provider is not caching the responses. You can disable caching by setting appropriate headers or options in your data provider configuration.
2. Force Refetch with Unique Key:
Sometimes, adding a unique key to the query can force a refetch. You can achieve this by updating the queryKey
with a unique value each time you want to refetch.
3. Check Data Provider Implementation:
Ensure that the data provider correctly handles the refetch logic. If you are using a custom data provider, verify that it does not cache the responses and properly fetches fresh data from the server.
4. Use invalidateQueries
:
If the above methods do not work, you can use the invalidateQueries
method from the query client to invalidate the cache and force a refetch.
By following these steps, you should be able to force a refetch and get the updated data. If the issue persists, it might be helpful to review the data provider's implementation and ensure it correctly handles the refetch logic.
For more information, you can refer to the following documentation:
- Refine useTable Documentation (https://refine.dev/docs/ui-integrations/ant-design/hooks/use-table/#queryoptions)
- Refine FAQ on Refetching Data (https://refine.dev/docs/guides-concepts/faq/#how-can-i-refetch-data)
If you need further assistance, please let me know!
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@705425032960016475> kapa.ai is still learning and improving, please let us know how it did by reacting below
judicial-coralOP•4mo ago
@kapa.ai how do you disable caching?
Let me check the knowledge base for you. One moment! :books:
----------------------
To disable caching in a refine application, you can configure the
queryOptions
in the useTable
hook to set cacheTime
and staleTime
to 0
. This will ensure that the data is always fetched fresh and not cached.
Here is an example of how to disable caching in a refine application using the useTable
hook:
In this example, setting cacheTime
and staleTime
to 0
ensures that the data is not cached and is always fetched fresh from the server.
For more information, you can refer to the following documentation:
- Refine useTable Documentation (https://refine.dev/docs/ui-integrations/ant-design/hooks/use-table/#queryoptions)
- React Query useQuery Documentation (https://react-query.tanstack.com/reference/useQuery)
If you need further assistance, please let me know!
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@705425032960016475> kapa.ai is still learning and improving, please let us know how it did by reacting below
judicial-coralOP•4mo ago
@kapa.ai this approach isn't working consitently
Let me check the knowledge base for you. One moment! :books:
----------------------
If disabling caching by setting
cacheTime
and staleTime
to 0
isn't working consistently, you can try using the invalidateQueries
method from the query client to ensure the cache is invalidated and fresh data is fetched. This approach can be more reliable in forcing a refetch.
Here is how you can use invalidateQueries
in your refine application:
1. Import and use useQueryClient
from react-query
:
2. Ensure the query key matches:
Make sure the query key used in invalidateQueries
matches the key used in your useTable
hook. This ensures that the correct cache is invalidated.
By using invalidateQueries
, you can force the query to refetch the data and ensure that you get the updated values.
For more information, you can refer to the following documentation:
- Refine useTable Documentation (https://refine.dev/docs/ui-integrations/ant-design/hooks/use-table/#queryoptions)
- React Query useQuery Documentation (https://react-query.tanstack.com/reference/useQuery)
- React Query invalidateQueries Documentation (https://react-query.tanstack.com/reference/QueryClient#queryclientinvalidatequeries)
If you need further assistance, please let me know!
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@705425032960016475> kapa.ai is still learning and improving, please let us know how it did by reacting below