data grid client filters not updating pagination
data grid client filters not updating pagination count
11 Replies
Hi @Joe Gaffney. I'm kapa.ai, your friendly support bot. I will try to answer your question by searching through the knowledge base. :wave:
----------------------
It seems like you're experiencing an issue where client-side filters in a data grid are not updating the pagination count correctly. This is a known issue and has been discussed in various contexts within the refine framework.
Relevant Information
1. Client-Side Pagination and Filtering:
When using client-side pagination (
pagination.mode: "client"
), filtering and sorting are applied to the sliced data, not the whole dataset. To ensure that filtering and sorting are applied to the entire dataset, you need to set pagination.mode
to "off"
.
Source: refine documentation on client-side pagination (https://refine.dev/docs/guides-concepts/faq/#how-to-handle-filters-and-sorters-when-using-client-side-pagination)
2. Issues with Filters and Pagination:
There have been multiple reports of issues where filters do not update the pagination correctly. For example, in the GitHub issue #4646 (https://github.com/refinedev/refine/issues/4646), it was noted that when using pagination.mode="client"
and filters.mode="off"
, the pagination does not rebuild correctly when filters are applied.
Source: GitHub Issue #4646 (https://github.com/refinedev/refine/issues/4646)
3. Workarounds and Solutions:
- Disable Refine's Pagination Logic: One approach is to completely disable refine's pagination logic and leave it to the UI library (e.g., Ant Design) to handle pagination and filtering.
- Manual Update of Filter Model: For MUI DataGrid, a workaround involves manually updating the filter model and passing the updated filter model to the data grid.
Source: GitHub Issue #5860 (https://github.com/refinedev/refine/issues/5860)
Conclusion
To address the issue of client-side filters not updating the pagination count, you can either disable refine's pagination logic and handle it through the UI library or manually update the filter model in the case of MUI DataGrid. These approaches should help ensure that the pagination count is correctly updated when filters are applied.
For more detailed information, you can refer to the following sources:
- Client-Side Pagination and Filtering (https://refine.dev/docs/guides-concepts/faq/#how-to-handle-filters-and-sorters-when-using-client-side-pagination)
- GitHub Issue #4646 (https://github.com/refinedev/refine/issues/4646)
- GitHub Issue #5860 (https://github.com/refinedev/refine/issues/5860)
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@422289470487003153> kapa.ai is still learning and improving, please let us know how it did by reacting below
extended-salmon•3w ago
@kapa.ai I am using useDataGrid
Let me check the knowledge base for you. One moment! :books:
----------------------
If you are using the
useDataGrid
hook and experiencing issues where client-side filters are not updating the pagination count correctly, here are some steps and considerations to help resolve the issue:
Steps to Resolve the Issue
1. Ensure Correct Pagination Mode:
Make sure that the pagination mode is set correctly. If you are using client-side pagination, you might need to disable refine's pagination logic and handle it through the UI library.
2. Manual Update of Filter Model:
For MUI DataGrid, you can manually update the filter model and pass the updated filter model to the data grid.
``tsx
import React from "react";
import { useDataGrid, List } from "@refinedev/mui";
import { DataGrid, GridColDef } from "@mui/x-data-grid";
import Button from "@mui/material/Button";
import ButtonGroup from "@mui/material/ButtonGroup";
const EmployeeList: React.FC = () => {
const { dataGridProps, setSorters, setFilters } = useDataGrid();
const columns = React.useMemo<GridColDef[]>(() => [
{ field: "id", headerName: "ID", minWidth: 30 },
{ field: "full_name", headerName: "Full Name", minWidth: 150, flex: 1, valueGetter: (params) =>
${params.row.first_name ""} ${params.row.last_name ""}` },
{ field: "email", headerName: "Email", minWidth: 250 },
{ field: "department", headerName: "Department", minWidth: 150 },
{ field: "role", headerName: "Role", minWidth: 150 },
{ field: "level", headerName: "Level", minWidth: 110 },
], []);
const handleSorting = (order: "asc" | "desc") => {
setSorters([{ field: "level", order }]);
};
const handleFilter = (e: React.ChangeEvent<HTMLInputElement>, checked: boolean) => {
let result: any = {
field: "status",
value: checked ? "active" : undefined,
operator: "contains",
};
setFilters([result]);
};
const { filterModel, ...restDataGridProps } = dataGridProps;
const filterModelUpdated: any = {
items: [...filters],
logicOperator: "and",
};
return (
<List>
<ButtonGroup variant="outlined">
<Button onClick={() => handleSorting("asc")}>Asc</Button>
<Button onClick={() => handleSorting("desc")
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@422289470487003153> kapa.ai is still learning and improving, please let us know how it did by reacting below
extended-salmon•3w ago
@kapa.ai is more the pagination is not respected it does not update the count correctly and the amount if filters are applied
Let me check the knowledge base for you. One moment! :books:
----------------------
If you are experiencing issues where the pagination count is not updating correctly when filters are applied using
useDataGrid
, this is a known issue. Here are some steps and considerations to help resolve the issue:
Steps to Resolve the Issue
1. Disable Refine's Pagination Logic:
One approach is to completely disable refine's pagination logic and handle it through the UI library (e.g., MUI DataGrid). This gives you full control over the pagination and filtering.
2. Manual Update of Filter Model:
For MUI DataGrid, you can manually update the filter model and pass the updated filter model to the data grid. This ensures that the pagination count is correctly updated when filters are applied.
``tsx
import React from "react";
import { useDataGrid, List } from "@refinedev/mui";
import { DataGrid, GridColDef } from "@mui/x-data-grid";
import Button from "@mui/material/Button";
import ButtonGroup from "@mui/material/ButtonGroup";
const EmployeeList: React.FC = () => {
const { dataGridProps, setSorters, setFilters } = useDataGrid();
const columns = React.useMemo<GridColDef[]>(() => [
{ field: "id", headerName: "ID", minWidth: 30 },
{ field: "full_name", headerName: "Full Name", minWidth: 150, flex: 1, valueGetter: (params) =>
${params.row.first_name ""} ${params.row.last_name ""}` },
{ field: "email", headerName: "Email", minWidth: 250 },
{ field: "department", headerName: "Department", minWidth: 150 },
{ field: "role", headerName: "Role", minWidth: 150 },
{ field: "level", headerName: "Level", minWidth: 110 },
], []);
const handleSorting = (order: "asc" | "desc") => {
setSorters([{ field: "level", order }]);
};
const handleFilter = (e: React.ChangeEvent<HTMLInputElement>, checked: boolean) => {
let result: any = {
field: "status",
value: checked ? "active" : undefined,
operator: "contains",
};
setFilters([result]);
};
const { filterModel, ...restDataGridProps } = dataGridProps;
const filterModelUpdated: any = {
items: [...filters],
logicOperator: "and",
};
return (
<List>
<ButtonGroup variant="outlined">
<Button onClick={() => handleSorting("asc")}>Asc</
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@422289470487003153> kapa.ai is still learning and improving, please let us know how it did by reacting below
extended-salmon•3w ago
@kapa.ai I want to use the useDataGrid with just off but it does not update the row count "rowCount": 101,
"paginationMode": "client",
"sortingMode": "client",
Let me check the knowledge base for you. One moment! :books:
----------------------
To use
useDataGrid
with pagination.mode
set to "off"
and ensure that the row count updates correctly, you need to handle the pagination and filtering logic manually. Here is how you can achieve this:
Steps to Implement
1. Set Pagination Mode to "off":
Disable refine's pagination logic by setting pagination.mode
to "off"
. This will allow you to handle pagination and filtering on the client side.
2. Manually Update the Row Count:
Ensure that the row count is updated correctly when filters are applied. You can achieve this by manually managing the state of the filtered data.
Example Code
Here is an example of how you can implement this using useDataGrid
:
Explanation
1. Disable Pagination:
The pagination.mode
is set to "off"
to disable refine's pagination logic.
2. Manage Filtered Rows:
The filteredRows
state is used to store the rows after applying filters. The useEffect
hook is used to update the filteredRows
whenever the original rows or filters change.
3. Update DataGrid:
The DataGrid
component is updated to use the filteredRows
instead of the original rows from dataGridProps
.
Additional Resources
For more detailed information, you can refer to the following sources:
- Pagination Mode in useDataGrid (https://refine.dev/docs/ui-integrations/material-ui/hooks/use-data-grid/#paginationmode)
- Handling Client-Side Sorting (https://refine.dev/docs/ui-integrations/material-ui/hooks/use-data-grid/#how-can-i-handle-client-side-sorting)
By following these steps, you should be able to use useDataGrid
with pagination.mode
set to "off"
and ensure that the row count updates correctly when filters are applied.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@422289470487003153> kapa.ai is still learning and improving, please let us know how it did by reacting below