39 Replies
Hi @. I'm kapa.ai, your friendly support bot. I will try to answer your question by searching through the knowledge base. :wave:
----------------------
Yes, the DeleteButton in refine can be configured to customize the confirmation messages. Here are the relevant configuration options:
1.
confirmTitle
: This prop allows you to set the text displayed in the confirmation popup.
2. confirmOkText
: This prop lets you customize the text for the confirmation (OK) button in the popup.
3. confirmCancelText
: This prop allows you to set the text for the cancel button in the confirmation popup.
Here's an example of how you can use these props:
These configuration options are available across different UI frameworks supported by refine, including Material UI, Ant Design, Mantine, and Chakra UI.
For more detailed information, you can refer to the following documentation:
Material UI DeleteButton API Reference
Ant Design DeleteButton API Reference
Mantine DeleteButton API Reference
Chakra UI DeleteButton API Reference
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@272684600247975937> Kapa.ai is still learning and improving, please let me know how I did by reacting below.
rival-blackOP•2w ago
@kapa.ai
how about config error message when api response 400 ?
Let me check the knowledge base for you again. One moment! :books:
----------------------
To configure the error message when the API responds with a 400 status code in refine, you can use the
errorNotification
prop. This prop allows you to customize the error notification that is displayed when the delete action fails.
Here's how you can configure it:
1. For the DeleteButton component:
2. For the useDelete
hook:
3. For the useDeleteMany
hook:
It's important to note that for these error notifications to work, you need to have a NotificationProvider
set up in your application.
If you want to handle server-side validation errors (like a 400 response) globally, you can configure your data provider to handle these errors. Here's an example of how you might set this up:
This setup allows you to handle and display specific error messages returned by your API when it responds with a 400 status code.
For more detailed information, you can refer to these documentation pages:
Data Hooks useDelete
Data Hooks useDeleteMany
Forms Server Side Validation
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@272684600247975937> Kapa.ai is still learning and improving, please let me know how I did by reacting below.
rival-blackOP•2w ago
@kapa.ai
in useSelect how to using defaultValueQueryResult ?
Let me check the knowledge base for you again. One moment! :books:
----------------------
To use the
defaultValueQueryResult
in the useSelect
hook of refine, you can access it directly from the hook's return value. The defaultValueQueryResult
is particularly useful when you want to handle the loading state or access additional data related to the default value.
Here's an example of how you can use it:
The defaultValueQueryResult
is the result of a separate query that fetches the data for the default value(s) using the useMany
hook internally. This ensures that the default value is always present in the options, even if it's not in the current page of results.
Some key points about defaultValueQueryResult
:
1. It's useful for handling loading states specific to the default value.
2. You can access additional data related to the default value that might not be included in the regular options.
3. It helps ensure that the default value is always available in the select options.
For more detailed information about the useSelect
hook and its return values, you can refer to the following documentation:
Data Hooks useSelect Return Values
Remember that the exact implementation might vary slightly depending on the UI framework you're using with refine (Ant Design, Mantine, etc.), but the core concept remains the same.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@272684600247975937> Kapa.ai is still learning and improving, please let me know how I did by reacting below.
rival-blackOP•2w ago
@kapa.ai
defaultValue: 1, // or [1, 2] for multiple default values
it not work
Let me check the knowledge base for you again. One moment! :books:
----------------------
I apologize for the confusion. If the
defaultValue
is not working as expected in the useSelect
hook, there could be a few reasons for this. Let's explore some potential issues and solutions:
1. Make sure you're using the latest version of refine, as there have been some updates and fixes related to the defaultValue
functionality.
2. The defaultValue
should match the type of your optionValue
. If your optionValue
is a string, make sure your defaultValue
is also a string:
3. If you're still facing issues, you can try using the defaultValueQueryOptions
to debug:
This will help you see if the default value is being fetched correctly.
4. There was a known issue related to the enabled
property in queryOptions
not working as intended with defaultValue
. This has been addressed in more recent versions of refine. If you're still experiencing this issue, make sure you're using the latest version of refine.
Github Issue: defaultValue and queryOptions.enabled
5. If you're using the Ant Design version of useSelect
, make sure you're passing the selectProps
to your <Select>
component:
If you're still having trouble after trying these suggestions, it would be helpful to see more of your code and know which UI framework you're using with refine (Ant Design, Mantine, etc.). This would allow for a more specific diagnosis of the issue.
For more detailed information about useSelect
and its properties, you can refer to the following documentation:
Data Hooks useSelect
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@272684600247975937> Kapa.ai is still learning and improving, please let me know how I did by reacting below.
rival-blackOP•2w ago
nahhh
@kapa.ai
selectProps how abnout properties habout this ?
Let me check the knowledge base for you again. One moment! :books:
----------------------
The
selectProps
returned by the useSelect
hook in refine contains various properties that can be directly passed to the Select component. The exact properties may vary slightly depending on which UI framework you're using with refine (Ant Design, Mantine, etc.). Let's look at some of the key properties:
For Ant Design:
According to the Ant Design useSelect documentation, selectProps
includes:
1. options
: An array of options for the Select component.
2. loading
: A boolean indicating whether the options are being loaded.
3. onSearch
: A function to handle search functionality.
4. filterOption
: Set to false
to disable client-side filtering of options.
Here's an example of how you might use these props:
For Mantine:
The Mantine useSelect documentation shows that selectProps
includes:
1. data
: An array of options for the Select component.
2. searchable
: A boolean to enable search functionality.
3. onSearchChange
: A function to handle search changes.
4. filterDataOnExactSearchMatch
: A boolean to control filtering behavior.
Here's how you might use these props with Mantine:
It's important to note that these properties are designed to work seamlessly with their respective UI components. By spreading {...selectProps}
into your Select component, you're automatically setting up the component with the correct options, loading state, and search functionality as provided by the useSelect
hook.
Remember, the exact properties and their behavior might vary slightly based on your specific refine version and configuration. Always refer to the most up-to-date documentation for your specific setup.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@272684600247975937> Kapa.ai is still learning and improving, please let me know how I did by reacting below.
rival-blackOP•7d ago
@kapa.ai
i do filter from and using useTable in filter i do initial value some field but in useTable Query not appear how about to do ?
Let me check the knowledge base for you again. One moment! :books:
----------------------
To address your issue with initial filter values not appearing in the useTable query, let's look at how to properly set up initial filters with useTable in refine.
The
useTable
hook in refine allows you to set initial filters using the filters.initial
property. Here's how you can set it up:
If your initial filters are not appearing in the query, here are a few things to check:
1. Make sure you're using the correct field names and operators that match your API's expectations.
2. Verify that the filters.initial
array is properly formatted with field
, operator
, and value
properties for each filter.
3. Check if you have syncWithLocation
enabled. If so, the URL parameters might be overriding your initial filters. You can disable it or handle it appropriately:
4. If you're using a custom data provider, ensure it's properly handling the filters passed to it.
5. You can also try using the permanent
filter option instead of initial
if you want the filter to always be applied:
6. If you're still having issues, you can debug by logging the filters:
For more detailed information about filtering with useTable, you can refer to the following documentation:
Data Hooks useTable Filtering
If you're still experiencing issues after trying these suggestions, it would be helpful to see more of your code, including how you're using the useTable
hook and how you're rendering the table and filters. This would allow for a more specific diagnosis of the issue.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@272684600247975937> Kapa.ai is still learning and improving, please let me know how I did by reacting below.
rival-blackOP•7d ago
@kapa.ai
operator: "contains", how about eq ?
Let me check the knowledge base for you again. One moment! :books:
----------------------
Certainly! The "eq" operator is indeed available in refine for filtering. It stands for "equals" and is used for exact matching. Here's how you can use it with the
useTable
hook:
In this example, the filter will look for records where the "status" field exactly matches the value "active".
The "eq" operator is particularly useful for:
1. Filtering by exact values (like IDs, status codes, or specific categories)
2. Boolean fields (true/false)
3. Numeric exact matches
It's important to note that the available operators may depend on your data provider. The "eq" operator is one of the most common and is typically supported by all data providers.
For more information on the available filter operators in refine, including "eq", you can refer to the CrudOperators documentation.
Remember, the choice between "contains" and "eq" depends on your specific use case:
- Use "contains" for partial string matches
- Use "eq" for exact matches
If you need to switch between these operators dynamically, you might want to look into the setFilters
function returned by useTable
to update filters on the fly.
Data Hooks useTable Filtering
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@272684600247975937> Kapa.ai is still learning and improving, please let me know how I did by reacting below.
rival-blackOP•7d ago
@kapa.ai
initialFilter: [
{ field: 'companyId', operator: 'eq', value: !isOnlySuperAdminOrAdmin ? user?.company?.id : '' },
{ field: 'organizationId', operator: 'eq', value: !isOnlyOrganizationAdmin ? user?.organization?.id : '' },
],
initialFilter: [
{ field: 'companyId', operator: 'eq', value: '' },
{ field: 'organizationId', operator: 'eq', value: '' },
],
why toper is not appear filter but below is appear and search ?
Let me check the knowledge base for you again. One moment! :books:
----------------------
Based on the information provided in the knowledge sources and our previous conversation, I can explain why you're seeing different behaviors with these two
initialFilter
configurations.
The key difference lies in the values you're passing to the filters:
1. In the first configuration:
The filter values are conditionally set based on certain conditions (isOnlySuperAdminOrAdmin
and isOnlyOrganizationAdmin
). If these conditions result in empty strings (''), refine might be ignoring these filters.
2. In the second configuration:
The filter values are explicitly set to empty strings.
The reason the second configuration appears in the filter and search while the first doesn't could be due to how refine handles empty or falsy values in filters.
To address this issue, you could try the following:
1. Use the filters.permanent
option instead of initialFilter
if you want these filters to always be applied, even with empty values:
2. Use undefined
instead of empty strings for falsy values:
3. If you want to include empty string filters, you might need to configure your data provider to handle them appropriately.
For more detailed information on filtering with useTable
, you can refer to the Data Hooks useTable Filtering documentation.
Remember to check your browser's network tab to see what queries are actually being sent to your API. This can help you understand how refine is processing your filter configurations.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@272684600247975937> Kapa.ai is still learning and improving, please let me know how I did by reacting below.
rival-blackOP•7d ago
@kapa.ai
how to do delay fetch data for useTable when first time open page ?
Let me check the knowledge base for you again. One moment! :books:
----------------------
To delay fetching data for
useTable
when first opening a page in refine, you can use the queryOptions
property with the enabled
option. This allows you to control when the query should run. Here's how you can implement this:
In this example:
1. We use a useState
hook to create an enabled
state, initially set to false
.
2. We use a useEffect
hook to set up a timer that will change enabled
to true
after a delay (in this case, 2 seconds).
3. We pass the enabled
state to the queryOptions.enabled
property of useTable
. This tells refine to only start the query when enabled
is true
.
4. While enabled
is false
, we render a loading state.
This approach allows you to delay the initial data fetch when the page is first opened. You can adjust the delay time (2000 milliseconds in this example) to suit your needs.
For more information on the queryOptions
property and other options available in useTable
, you can refer to the useTable documentation.
Remember that this approach will delay all data fetching for the table. If you need more granular control, you might want to consider using the useList
hook directly or implementing a custom data fetching strategy.
Data Hooks useTable
Data Hooks useList
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@272684600247975937> Kapa.ai is still learning and improving, please let me know how I did by reacting below.
rival-blackOP•7d ago
@kapa.ai
useEffect(() => {
if (user && !isOnlySuperAdminOrAdmin ) {
if (user.company) {
refCompany.current = user.company.id;
} if (user.organization && user.organization.id && isOnlyOrganizationAdmin) {
refOrganization.current = user.organization.id; } console.log('done setting ////.', refCompany.current, refOrganization.current); setEnabled(true); } }, [user]); const { tableProps, filters, sorter, searchFormProps, tableQueryResult: organizationHasBookTableQueryResult } = useTable<IBorrowHistory, HttpError, IOrganizationHasBookFilterVariables>({ queryOptions: { enabled: enabled, }, resource:
} if (user.organization && user.organization.id && isOnlyOrganizationAdmin) {
refOrganization.current = user.organization.id; } console.log('done setting ////.', refCompany.current, refOrganization.current); setEnabled(true); } }, [user]); const { tableProps, filters, sorter, searchFormProps, tableQueryResult: organizationHasBookTableQueryResult } = useTable<IBorrowHistory, HttpError, IOrganizationHasBookFilterVariables>({ queryOptions: { enabled: enabled, }, resource:
report/rpt05/find
,
// initialSorter: [{ field: 'id', order: 'asc'}],
// initialFilter: [
// { field: 'userCode', operator: 'contains', value: '%' },
// { field: 'bookName', operator: 'contains', value: '%' },
// { field: 'bookCode', operator: 'contains', value: '%' },
// { field: 'author', operator: 'contains', value: '%' },
// { field: 'publisher', operator: 'contains', value: '%' },
// ],
initialFilter: [
{ field: 'companyId', operator: 'eq', value: refCompany.current },
{ field: 'organizationId', operator: 'eq', value: refOrganization.current },
],
i do and in log i print it has data but why not appear query ? it will still how '' whyLet me check the knowledge base for you again. One moment! :books:
----------------------
Based on the code you've provided and the issue you're describing, there are a few potential reasons why the query is not appearing with the expected values. Let's analyze the problem and suggest some solutions:
1. Timing Issue:
The
useEffect
hook is setting the refCompany.current
and refOrganization.current
values, but these changes might not be reflected immediately in the initialFilter
of useTable
. React's useRef
doesn't trigger a re-render when its value changes.
2. Closure Issue:
The initialFilter
in useTable
is likely capturing the initial values of refCompany.current
and refOrganization.current
, which are probably empty strings or undefined at the time the component first renders.
To resolve these issues, you can try the following approaches:
1. Use State Instead of Ref:
Instead of using useRef
, use useState
to store the company and organization IDs. This will ensure that the component re-renders when these values change.
2. Use filters.permanent
Instead of initialFilter
:
As mentioned in the Data Hooks useTable Filtering documentation, filters.permanent
is designed for filters that should always be applied and won't be cleared when the user changes other filters.
3. Use defaultFilter
Instead of initialFilter
:
If you want to set the initial filter but allow it to be changed later, you can use defaultFilter
:
4. Use queryOptions.defaultData
:
If you want to provide default data while the query is loading or disabled, you can use queryOptions.defaultData
:
Remember to handle cases where companyId
or organizationId
might be empty strings or undefined, as these might be ignored by your API or data provider.
If you're still experiencing issues after trying these solutions, it would be helpful to see the network requests being made (you can check this in your browser's developer tools) to understand how the query is being constructed and sent to your API.
Data Hooks useTable
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@272684600247975937> Kapa.ai is still learning and improving, please let me know how I did by reacting below.
rival-blackOP•7d ago
@kapa.ai When using about queryOptions how to do controll about loadding tableProps ?
Let me check the knowledge base for you again. One moment! :books:
----------------------
When using
queryOptions
with useTable
in refine, you can control the loading state of tableProps
in a few ways. Here's how you can manage the loading state:
1. Using the tableProps.loading
property:
The useTable
hook returns tableProps
which includes a loading
property. This property is automatically managed by refine based on the query state. You can use it directly in your table component:
2. Using tableQueryResult
:
The useTable
hook also returns tableQueryResult
, which gives you more granular control over the query state:
3. Controlling the loading state with queryOptions
:
You can use queryOptions.enabled
to control when the query should run, which indirectly affects the loading state:
4. Custom loading state:
If you need more control, you can create your own loading state:
Remember, the exact implementation might vary slightly depending on which UI framework you're using with refine (Ant Design, Mantine, etc.).
For more detailed information about useTable
and its properties, you can refer to the following documentation:
Data Hooks useTable
Data Hooks useTable Return Values
These approaches give you flexibility in managing the loading state of your table when using useTable
with queryOptions
.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@272684600247975937> Kapa.ai is still learning and improving, please let me know how I did by reacting below.
rival-blackOP•7d ago
i mean when do
queryOptions: {
enabled: false,
},
and table loaddiung is still load @kapa.ai
Let me check the knowledge base for you again. One moment! :books:
----------------------
I understand your concern. When you set
queryOptions: { enabled: false }
in the useTable
hook, you're telling refine not to automatically fetch data when the component mounts. However, you're still seeing the table in a loading state. This behavior is not expected, and there might be a few reasons for this:
1. The loading state might be controlled by something else in your component or a parent component.
2. There might be a bug in the version of refine you're using.
To address this issue, you can try the following:
1. Use the tableQueryResult
to check the actual query state:
2. Explicitly set the loading prop to false:
3. If you're using Ant Design, you might need to handle the loading state differently. According to the Ant Design useTable documentation, you can try:
4. If none of the above work, you might want to check if there's any global loading state or interceptor in your application that's causing this behavior.
If you're still experiencing issues after trying these solutions, it would be helpful to see more of your component code and check which version of refine you're using. There might be a specific issue with your setup or a bug in the version you're using.
Remember, when enabled
is set to false
, the query should not run and the table should not be in a loading state unless explicitly set elsewhere in your code.
Data Hooks useTable
If this issue persists, you might want to consider reporting it as a bug to the refine team through their GitHub issues page.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@272684600247975937> Kapa.ai is still learning and improving, please let me know how I did by reacting below.
rival-blackOP•6d ago
@kapa.ai
useForm how to refetch data ? now i using about defaultFormValues ??
Let me check the knowledge base for you again. One moment! :books:
----------------------
To refetch data in
useForm
when you're using defaultFormValues
, you have a couple of options. Let's explore them:
1. Using the queryResult
returned by useForm
:
The refetch
function from queryResult
allows you to manually trigger a refetch of the form data.
2. Using the useInvalidate
hook:
If you need to invalidate and refetch data from outside the form component, you can use the useInvalidate
hook:
This approach is particularly useful when you need to refetch data after some external action or state change.
3. Using queryOptions
:
You can also control when the query runs using queryOptions
:
This approach gives you more control over when the refetch occurs.
Remember, the exact implementation might vary slightly depending on which UI framework you're using with refine (Ant Design, Mantine, etc.).
For more detailed information about useForm
and its properties, you can refer to the following documentation:
Data Hooks useForm
Ant Design useForm
These approaches should give you flexibility in refetching data when using useForm
with defaultFormValues
.
----------------------
Note: you can ask me a follow up question by @ mentioning me again :speech_balloon:
----------------------<@272684600247975937> Kapa.ai is still learning and improving, please let me know how I did by reacting below.
xenogeneic-maroon•6d ago
Hello @ ,
kapa.ai is now available for free at https://refine.dev/docs!
To improve our community interaction on the Refine Discord server and keep our focus on Q&A sharing, we invite you to our website to use kapa.ai. 🚀